
What chimney work costs in Philadelphia
Ballpark 2026 numbers for everything from a South Philly rowhouse stack to a Bucks County farmhouse chimney. Looking costs you nothing; a sweep is quoted once we have seen the flue.
Start with the free inspection
Chimney companies around Philadelphia that publish prices charge $69 to $500 for an inspection, depending on the level and whether a camera goes down the flue. We do ours at no charge: roof, flue and firebox, photographed, with a written number for each item so it can sit next to any competing quote.
Where the money goes in an old Philadelphia chimney
- The top of the stack. The 2021 IRC (R1003.9.1) wants a real cap of poured concrete, metal or stone that overhangs with a drip edge and leaves a flexible, sealed gap at the flue tile. Most old crowns are a thin mortar wash instead, and the suburbs freeze far more often than the city: about 62 nights a year at or below freezing in Center City, about 131 in West Chester (NOAA 1991–2020 normals).
- The joints. Rowhouse brick is hard on its outer face and soft inside, and the City's Rowhouse Manual says thin old butter joints have to be raked out by hand. The Park Service's repointing brief wants the new joint to give way before the brick does. Doing it that way is slower, and it is the difference between a repair and new damage.
- The flue. Fuel oil still heats about a fifth of the homes in Bucks and Berks counties. When a house moves to gas, code calls for the old chimney to be resized for what is left on it, and that tends to mean a stainless liner matched to the new burner.
Brick, stone and water work
| Job | What usually brings us out | 2026 ballpark |
|---|---|---|
| Chimney Repair | Water, freeze-thaw and hard mortar | $150 – $3,500 |
| Rowhouse & Party-Wall Chimneys | Shared stacks, additions next door, old soft brick | $500 – $3,500 |
| Historic District Chimney Repair | Designated property, old brick, soft lime mortar | $500 – $3,500 |
| Stone & Serpentine Chimney Repointing | Freeze-thaw, hard cement patches, soft stone | $500 – $3,500 |
| Chimney Repointing | Weathered joints or hard, mismatched mortar | $500 – $2,500 |
| Chimney Crown Repair | Thin mortar caps, no drip edge, freeze-thaw | $150 – $2,500 |
| Chimney Flashing Repair | Failed flashing, old tar patches, no cricket | $300 – $3,500 |
| Chimney Leak Repair | Cracked crown, tired flashing or no cap | $150 – $1,500 |
| Breathable Waterproofing | Soft brick soaking up rain | $150 – $820 |
| Chimney Rebuild | Decades of water and freeze-thaw | $1,000 – $15,000 |
| Chimney Removal | An unused stack that leaks or crumbles | $3,000 – $6,000 |
Inside the flue and on top of it
| Job | What usually brings us out | 2026 ballpark |
|---|---|---|
| Furnace, Boiler & Water Heater Flues | A flue sized for an appliance that is gone | $2,100 – $3,800 |
| Chimney Liners & Relining | Cracked tile, no tile, or a new appliance | $900 – $3,800 |
| Chimney Caps & Chase Covers | No cap, or a rusted one | $200 – $700 |
| Top-Sealing Dampers | Rusted or warped throat damper | $140 – $420 |
| Firebox & Smoke Chamber | Heat cracking and missing mortar | $150 – $2,000+ |
Gas units, stoves and inserts
| Job | What usually brings us out | 2026 ballpark |
|---|---|---|
| Gas Fireplace Repair | Worn pilot parts or a fouled burner | $90 – $350 |
| Gas Fireplace Service | Dust, spider webs and a skipped year | After free inspection |
| Gas Inserts & Wood-to-Gas | A drafty wood fireplace nobody uses | $2,000 – $5,000 |
| Wood Stove & Insert Installation | Wanting real heat from wood | $3,000 – $8,000 |
Sweeping, looking and smoke trouble
| Job | What usually brings us out | 2026 ballpark |
|---|---|---|
| Free Chimney Inspection | Yearly check, new owner or a heating change | Free |
| Chimney Sweep & Cleaning | Soot, creosote, oil residue and nests | After free inspection |
| Creosote Removal | Cool fires, damp wood and long, slow burns | After free inspection |
| Wood & Pellet Stove Cleaning | Daily burning, slow fires, fly ash | After free inspection |
| Animal & Nest Removal | An open flue with no cap | $600 – $1,500 |
| Smoky Fireplace & Draft | Draft, height, a tight house or a shared flue | $140 – $700 |
| Home-Sale Chimney Inspection | Disclosure form, buyer questions or a home inspector's note | Free |
Why the same job costs more on some houses
- Access. A three-story rowhouse with the chimney at the party wall, or a steep slate roof on the Main Line, needs more staging than a ranch house in Bensalem.
- Soft brick and stone. Hand-raked joints and a soft, matched mortar take longer than grinding out a modern joint.
- Time. A leak that has run through five Philly winters has eaten far more brick and mortar than one caught in its first.
- The appliance. A chimney that once served an oil boiler and now serves a gas water heater usually needs a liner sized to the new appliance.
- Historic review. On a designated Philadelphia property, pointing counts as an alteration and the Historical Commission may want to see a mortar sample in the field first. We put together the photos and written scope you will need.
- Permits. Rules differ from Philadelphia to each township and borough. We check what yours requires.
Holding someone else's estimate? The blog walks through what moves the price on the jobs we price most. Read the blog
Schedule
Choose a morning or an afternoon.
Sunday through Friday, arrival between 8 and 11, 11 and 2, or 2 and 5. The look costs nothing, and a person phones you the day before.
